Wulf Mods Next Dry Herb Vaporizer Premium Vaporizer Manual

The Wulf Mods Next Dry Herb Vaporizer is your gateway to an elevated vaping experience. Compact and discreet, it offers unparalleled performance through features like a powerful 1600mAh battery, rapid heating capabilities, and customizable temperature settings. This manual will guide you through the setup, use, and maintenance of your device to ensure a superb experience every time.

To power on the Wulf Mods Next, locate the power button situated on the side of the device. Press the power button rapidly 5 times. The LED light indicators will activate, signaling that the device is on. To power off the device, press the power button 5 times in a row once more.

To change the temperature settings of your vaporizer, double-click the power button. This action cycles through the 5 available temperature levels, ranging from 356°F to 428°F. The current temperature is indicated by the LED lights, and the setting you’re changing to will blink until it’s reached.

The Wulf Mods Next offers a Power Boost Mode for enhanced heating. To activate, press and hold the power button. The device’s lights will flash, increasing the temperature by 10 degrees every 5 seconds during the boost.

To load your dry herbs, first remove the magnetic mouthpiece by lifting it off the top of the device. Fill the chamber below with finely ground dry herb until it's about halfway full. Avoid overpacking to ensure optimal airflow. Once filled, reattach the magnetic mouthpiece securely.

Use the included USB cable for charging. Upon the first charge, allow the device to charge for a full 2 hours. After the initial charge, do not charge longer than 1 hour to maintain battery health.

Safety Cut-Off

The device has an automatic safety cut-off after 4 minutes of inactivity to prevent overheating and battery drain.

Low Battery Warning

When the battery is low, a red LED light will display and the device will power off. Charge the device promptly to continue use.

Proper maintenance involves regular cleaning of the chamber and mouthpiece. Use the included cleaning brush to remove residue from the chamber. For more stubborn build-up, gently use a cotton swab with a dab of isopropyl alcohol. Make sure all components are dry before reassembling.

WARNING: Do not use a power bank with an output of 5V or higher to charge the device. Avoid charging in your vehicle and do not overcharge, as using any cables other than the one provided can damage the battery and internal system. Always vape responsibly with your Wulf Mods Next Dry Herb Vaporizer.

```