HoneyStick HRB Plus Dry Herb Vaporizer Manual

The HoneyStick HRB Plus Dry Herb Vaporizer blends a spacious ceramic chamber, precise digital controls, and vibrating temperature notifications to deliver flavorful, efficient sessions with style. Use this manual to get set up, master daily operation, and keep your HRB+ in top condition.

Charging for the first time

• Connect the USB-C cable to the device and a quality 5V wall adapter. The HRB+ supports rapid USB-C charging and houses a 1500 mAh internal battery.
• Charge until the battery is full before first use for best performance.

Powering on and basic controls

• Click the main button 5 times to turn the device ON. It will vibrate to confirm power-on. Click the main button 5 times again to turn it OFF.
• Temperature adjustment buttons (+ and −) are located below the LED screen. While the unit is ON, press + or - to select a temperature between 356°F and 428°F (180°C to 220°C).
• To switch temperature units, click the main button 3 times rapidly to toggle between Fahrenheit and Celsius.

• Grind your dry herb to a medium-fine consistency.
• Remove the magnetic mouthpiece by gently lifting it off the top of the device.
• Fill the spacious 14 mm ceramic heating chamber. Do not overpack. Tamp lightly for even airflow and brush away any loose material from the rim.
• Secure the magnetic mouthpiece until it snaps into place.

Starting a session

• With the device ON and your preferred temperature set, press the main button 2 times to begin heating.
• The LED screen displays heating progress. The HRB+ typically reaches temperature in about 10 seconds and will vibrate briefly when ready.
• Once at temperature, the device maintains heat and “bakes” your herbs for a 4-minute session. A session timer appears at the top of the LED screen.

Taking draws and adjusting on the fly

• Inhale with slow, steady draws for dense, flavorful vapor.
• At any time during use, you can press + or - (below the LED screen) to adjust the temperature. The device will stabilize at the new setting and continue the session.

Stopping or restarting

• To stop mid-session, press the main button 2 times.
• After 4 minutes, heating stops automatically for safety. To start another session, press the main button 2 times again.
• The unit will automatically power down after 5 minutes of inactivity.

• Main button: click 5 times to power ON or OFF. Press 2 times to start or stop a heating session. Click 3 times rapidly to toggle °F/°C.
• + and − buttons: Located below the LED screen. While the unit is ON, press + or - to set your temperature between 356°F and 428°F (180°C to 220°C).
• LED screen: Displays current and target temperature, heating progress, and a session timer during active heating.
• Haptic feedback: The HRB+ will vibrate when it reaches your target temperature.

• Use a medium-fine grind and a light pack to promote even airflow.
• Stir or shake the bowl between sessions if material becomes compacted.
• Start at a lower temperature for flavor, then increase gradually for denser vapor.
• Wait a few seconds between draws to let heat recover for consistent output.

• Connect a USB-C cable to the device and a reputable 5V power source. Rapid USB-C charging is supported.
• Avoid using the vaporizer while it is charging.
• Battery: 1500 mAh internal cell designed for multiple sessions per charge. Actual runtime varies by temperature and usage.

After each session

• Allow the device to cool completely.
• Remove the magnetic mouthpiece and empty the chamber.
• Brush the ceramic chamber to remove residue and keep airflow clear.

Periodic deep clean

• Wipe the chamber rim and mouthpiece pathway with a lightly moistened swab of isopropyl alcohol, then allow to dry fully.
• Avoid soaking the device or introducing liquid into the chamber or electronics.

• Vibrant color options with 5 unique skins
• Spacious 14 mm ceramic heating chamber for even, consistent heating
• Vibrating temperature notifications when target heat is reached
• Strong magnetic mouthpiece
• Digital temperature control: 356°F to 428°F (180°C to 220°C)
• Powerful 1500 mAh internal battery
• Rapid USB-C charging
• Automatic safety shut-off: heating stops after 4 minutes per session; device powers down after 5 minutes of inactivity

• Keep the device away from water, extreme temperatures, and children.
• Use only dry herb in the ceramic chamber. Do not load concentrates or liquids.
• Do not touch the chamber immediately after use. It becomes hot during operation.
• Unplug the charger once the battery is full.
• Operate the device only with intact, original components. Do not modify.

• Device not powering on: Charge the battery and click the main button 5 times quickly.
• No heat when ON: Press the main button 2 times to start a session. Wait for the vibration signal.
• Weak vapor: Grind finer, reduce packing density, increase temperature slightly, and ensure the magnetic mouthpiece is fully seated.
• Session ends too soon: The HRB+ stops heating after 4 minutes by design. Press the main button 2 times to start a new session.
• Accidental shutdown: The device powers down after 5 minutes of inactivity. Click the main button 5 times to turn it back on.