HRB Ultimate E-Rig Product Manual
HRB’Dup Ultimate E-Rig Product Manual
Portable electric dab rig instructions for wax and concentrates. Learn how to assemble, load, heat, adjust temperature, clean, store, and troubleshoot your HRB’Dup E-Rig.
Table of Contents
Important Safety Notice
The HRB’Dup Ultimate E-Rig is intended for adult users only. Always follow local laws and use this device responsibly.
- Keep out of reach of children and pets.
- Do not overfill the glass percolator with water.
- Do not overload the quartz cup with concentrate.
- Allow all parts to cool before cleaning, handling, or storing.
- Use only the included or manufacturer-recommended accessories.
- Store the device dry, clean, and powered off.
- Check out the full review of HRB'Dup E-rig
1. Kit Contents
Your HRB’Dup Ultimate E-Rig Kit includes the core rig system, glass components, heating accessories, charging cable, dab tool, waterproof case, and a free thermometer gift.
Included in the Box
- 1 x HRB’Dup Ultimate E-Rig Base with 5200mAh Battery
- 1 x Glass Percolator, magnetic attaching to base
- 1 x Wax Atomizer with Coil-Less Quartz Cup
- 1 x Glass Carb Cap Atomizer Cover with Silicone Tether
- 2 x Quartz Balls for Dabs
- 1 x USB-C Charging Cable
- 1 x Packaging Dab Tool
- 1 x Airtight Waterproof Carrying Case
- FREE GIFT: 1 x DAB-Temp Digital Thermometer
Carrying Case Size
10.0" / 8.0" / 3.75"
The included case helps keep your rig parts organized, protected, and ready for travel or storage.
2. Main Parts Overview
E-Rig Base
Houses the battery, control system, OLED screen, power button, temperature buttons, LED lights, and charging port.
Glass Percolator
Attaches magnetically to the base and provides water filtration for smoother, cooler vapor.
Quartz Cup Atomizer
The coil-less quartz cup holds and heats your concentrate for cleaner flavor and controlled vapor production.
Glass Carb Cap
Covers the atomizer during use and helps direct airflow over the concentrate.
Quartz Balls
Help move heat and airflow inside the chamber for better vapor movement and improved session performance.
USB-C Charging Cable
Used to recharge the 5200mAh battery. Do not use the device while charging.
3. First-Time Setup
Inspect All Parts
Check that all parts are present and undamaged. Do not use the device if glass is cracked, chipped, or damaged.
Fully Charge the Device
Connect the USB-C cable to the charging port and fully charge the device before first use. Recommended input: 5V / 3A when available.
Fill the Glass Percolator
Add clean water slowly. Fill approximately one-third full or to the recommended water level. Do not overfill.
Install the Atomizer
Make sure the base is powered off, then attach the wax atomizer securely. Do not overtighten or force it.
Add Quartz Balls
Place the quartz balls into the quartz cup. Do not use broken, chipped, wet, or dirty quartz balls.
4. Loading Concentrate
Start small. A small dab works better than overloading the chamber. Too much concentrate can cause bubbling, clogging, leaking, harsh vapor, sticky residue, and harder cleaning.
Remove the Carb Cap
Make sure the device is powered off or not actively heating before loading.
Use the Dab Tool
Pick up a small amount of concentrate using the included tool.
Place Concentrate in the Quartz Cup
Place concentrate onto the bottom center of the quartz cup. Do not smear concentrate on the side walls.
Replace the Carb Cap
Place the carb cap back over the atomizer before heating.
5. Power Controls
Turn Device On
Press the power button 5 times quickly. The OLED screen should turn on and the device will enter standby mode.
Turn Device Off
Press the power button 5 times quickly again. The OLED screen should turn off.
6. Temperature Control
The HRB’Dup E-Rig features adjustable temperature control from 392°F to 932°F, or 200°C to 500°C.
How to Adjust Temperature
- Press + to increase temperature.
- Press - to decrease temperature.
- The OLED display will show your selected temperature.
| Temperature Range | Session Style | Best For |
|---|---|---|
| 392°F–500°F | Low-temp flavor | Terp flavor, smoother pulls, lighter vapor |
| 500°F–650°F | Balanced session | Flavor plus fuller vapor |
| 650°F–800°F | Stronger vapor | Bigger clouds, more intense pulls |
| 800°F–932°F | High-temp mode | Dense vapor, use carefully |
7. Manual Heating Mode
Manual heating gives you direct control over when the chamber heats.
- Load concentrate into the quartz cup.
- Attach the carb cap.
- Turn device on.
- Select your desired temperature.
- Press and hold the power button to heat.
- Inhale gently through the mouthpiece.
- Release the power button to stop heating.
Best For
Small dabs, short pulls, flavor testing, careful reheats, and users who want full heating control.
8. Automatic Heating Mode
Automatic heating runs a timed session at your selected temperature.
- Load concentrate into the quartz cup.
- Attach the carb cap.
- Turn device on.
- Select your temperature.
- Set your preferred session timer.
- Press the power button 2 times quickly to begin automatic heating.
- Wait for the device to reach temperature.
- Inhale gently during the session.
- Press the power button 2 times quickly again to stop the session if needed.
Best For
Consistent sessions, longer dabs, hands-free heating, and dabbers who want the rig to handle the heat cycle.
9. Session Timer
The HRB’Dup E-Rig allows session time adjustment from 10 seconds to 60 seconds.
How to Adjust Session Timer
- Turn the device on.
- Press and hold the plus (+) and minus (-) buttons together for about 2 seconds.
- The session timer setting should appear.
- Use + or - to adjust session length.
- Wait a moment for the setting to save.
| Session Time | Best For |
|---|---|
| 10–20 seconds | Small dabs, flavor testing, low-temp pulls |
| 20–35 seconds | Balanced everyday sessions |
| 35–45 seconds | Fuller vapor sessions |
| 45–60 seconds | Larger dabs or higher-temp vapor production |
10. OLED Display Guide
The OLED display helps remove guesswork by showing key session information.
Temperature
Shows selected and active temperature information.
Timer
Displays session time and remaining countdown.
Battery
Shows battery level so you know when to recharge.
11. LED Lights and Audible Feedback
The HRB’Dup E-Rig includes LED lights and audible beeps for session feedback.
LED Lights
LED lights may activate during heating, standby, or session operation. If supported, hold power + plus to control lights.
Sound Feedback
Audible beeps may confirm power, setting changes, or session start/stop. If supported, hold power + minus to control sound.
12. Full Session Walkthrough
Charge
Fully charge the device before your first session.
Fill
Fill the glass percolator with clean water. Do not overfill.
Assemble
Attach the glass percolator, atomizer, quartz balls, and carb cap.
Load
Add a small amount of concentrate to the bottom center of the quartz cup.
Power On
Click the power button 5 times quickly.
Set Temperature
Use the plus and minus buttons to choose your preferred heat level.
Heat
Use manual heating or press power 2 times quickly for automatic heating.
Inhale
Pull gently and keep the device upright.
Cool & Clean
Let all parts cool, then clean the quartz cup after use.
13. How to Inhale Properly
The HRB’Dup E-Rig works best with a slow, steady draw. Hard pulls can cause water splash, uneven vapor, or concentrate movement inside the chamber.
Do
- Inhale gently.
- Let the percolator bubble naturally.
- Keep device upright.
- Use clean water.
- Use small concentrate loads.
Do Not
- Pull too hard.
- Blow back into the mouthpiece.
- Tilt the device during use.
- Overfill the water chamber.
- Use while charging.
14. Cleaning and Maintenance
Clean your HRB’Dup E-Rig regularly for best flavor, airflow, and performance. Do not submerge the electronic base in water.
Recommended Cleaning Supplies
- Cotton swabs
- Isopropyl alcohol
- Soft cloth
- Warm water for glass parts
- Paper towel
- Small cleaning brush, if available
Cleaning the Quartz Cup
- Let the device cool completely.
- Remove the carb cap.
- Wipe out leftover concentrate with a cotton swab.
- Use isopropyl alcohol for sticky residue.
- Let the chamber dry fully before use.
Cleaning the Glass Percolator
- Remove glass from base.
- Empty all water after each session.
- Rinse with warm water.
- Use isopropyl alcohol for stubborn residue.
- Dry fully before storing.
Cleaning the Carb Cap
- Remove the carb cap.
- Wipe away residue with a cotton swab.
- Use isopropyl alcohol if needed.
- Dry completely before use.
Cleaning the Base
- Power off the device.
- Use a dry or lightly damp cloth.
- Clean connection points carefully.
- Do not allow liquid into the base.
15. Storage Instructions
- Turn device off.
- Empty all water from the glass percolator.
- Clean quartz cup and glass parts.
- Let everything dry completely.
- Store in the included waterproof carrying case.
- Keep away from heat, direct sunlight, children, and pets.
16. Troubleshooting Guide
| Problem | Possible Cause | Try This |
|---|---|---|
| Device will not turn on | Battery is dead, button clicks too slow, cable issue | Charge fully, click power 5 times quickly, check cable and adapter |
| Weak vapor | Low temperature, dirty cup, low battery, blocked airflow | Increase temperature gradually, clean quartz cup, charge battery, check carb cap |
| Harsh vapor | Temperature too high, old residue, session too long | Lower temperature, shorten timer, clean quartz cup, use smaller dabs |
| Burnt taste | Dirty quartz cup, overheated concentrate, reheated residue | Clean chamber, lower temperature, swab after every dab |
| Water splashing | Too much water, pulling too hard, device tilted | Reduce water level, inhale gently, keep device upright |
| Concentrate leaking or clogging | Overloaded cup, concentrate on side walls, poor cleaning | Use smaller amounts, load center of cup, clean airflow path |
| Atomizer not heating | Poor connection, dirty contact points, low battery | Power off, reattach atomizer, clean contacts, charge device |
17. Best Use Tips for Dabbers
For Best Flavor
Start at lower temperatures, use small dabs, keep the quartz cup clean, use fresh water, and avoid reheating old residue.
Recommended range: 392°F–550°F
For Bigger Vapor
Use medium to higher temperatures, make sure battery is charged, keep airflow clear, and do not overload the cup.
Recommended range: 600°F–750°F
For Smoothest Pulls
Use clean water, do not overfill the glass, inhale slowly, keep the device upright, and clean glass regularly.
18. Recommended Temperature Cheat Sheet
| Goal | Suggested Temperature |
|---|---|
| Maximum flavor | 392°F–475°F |
| Smooth everyday use | 475°F–575°F |
| Balanced flavor and vapor | 575°F–650°F |
| Thicker vapor | 650°F–750°F |
| Strong vapor production | 750°F–850°F |
| Very high-temp sessions | 850°F–932°F |
19. Common User Mistakes to Avoid
Overloading the Quartz Cup
More concentrate does not always mean better vapor. Too much can cause bubbling, clogging, and waste.
Pulling Too Hard
Gentle draws give better results. Hard pulls can splash water or disrupt airflow.
Skipping Cleaning
Old residue hurts flavor and vapor production. Swab the quartz cup after each session.
Using Too Much Water
Overfilling the percolator can create splashback and mess. Keep water at the recommended level.
Touching Hot Parts
The quartz cup, atomizer, carb cap, and glass may stay hot after use. Let everything cool.
Storing With Water Inside
Always empty and dry the glass before storing or traveling.
20. Quick Reference Controls
| Action | Button Command |
|---|---|
| Power On | Press power button 5 times quickly |
| Power Off | Press power button 5 times quickly |
| Increase Temperature | Press plus (+) |
| Decrease Temperature | Press minus (-) |
| Start Automatic Heating | Press power button 2 times quickly |
| Stop Automatic Heating | Press power button 2 times quickly |
| Manual Heating | Press and hold power button |
| Adjust Session Timer | Hold plus (+) and minus (-) together |
| LED Light Control | Hold power + plus, if supported |
| Sound Control | Hold power + minus, if supported |
21. Product Summary
The HRB’Dup Ultimate E-Rig is designed for dabbers who want a smoother, smarter, torch-free concentrate session. With a coil-less quartz cup, glass percolator, glass carb cap, quartz balls, 5200mAh battery, OLED display, USB-C charging, manual and automatic heating, and a 10–60 second session timer, this portable electric dab rig brings serious dab-station power into a controlled, modern setup.
It is ideal for users who want the flavor and ritual of a traditional rig, but with cleaner operation, better temperature control, and fewer open-flame circus tricks.
Final Dabber Note
Load small. Pull gently. Clean often. Respect the quartz. Your dabs will thank you.
View HRB’Dup Ultimate E-RigDisclaimer: This manual is intended for adult users and product education only. Always follow the manufacturer’s included instructions, use the device responsibly where legally permitted, and keep all concentrate devices away from children and pets.
