Rokin BAR Discreet 510 Vape Cart Battery Manual
The Rokin BAR Discreet 510 Vape Cart Battery delivers pocketable power with a concealed-cartridge design, 600 mAh rechargeable lithium-ion battery, and compatibility with most 510-thread oil cartridges. Choose auto-draw or button control, adjust four voltage settings for flavor or vapor, and rely on Powerwave™ technology for smooth, consistent performance during every session.
What comes in the box?
- Rokin BAR Discreet 510 Vape Cart Battery
- Magnetic bottom base
- USB-C charging cable
- Quick start information
- CART NOT INCLUDED
Which cartridges are compatible?
- 510-thread cartridges only, with a spring-loaded connection.
- Maximum cartridge size: up to 14 mm diameter and up to 65 mm height.
- Intended for oils in 510-thread cartridges. For aromatherapy purposes only.
How do I assemble and insert a cartridge?
- Remove the bottom magnetic base by gently pulling it off the device.
- Check your cartridge size. It must be 510-thread, up to 14 mm diameter, and up to 65 mm height.
- Insert the cartridge straight into the chamber, aligning the 510 threads with the spring-loaded connection. Do not overtighten.
- Reattach the bottom magnetic base until it seats firmly.
- On reassembly, the device will automatically power on and the LED will briefly flash white.
Tip: Ensure the cartridge mouthpiece remains unobstructed by the housing so airflow is clear.
How do I turn the device on or off?
The Rokin BAR has a single control button located on the device body.
- To power the device on or off, press the button five times rapidly.
- The device also powers on automatically when you reattach the bottom base after inserting a cartridge.
- Auto shut-off: the device will turn off after approximately 5 minutes of inactivity.
How do I choose a voltage level?
There are four voltage options so you can tailor flavor and vapor output:
- 2.2 V
- 2.7 V
- 3.2 V
- 3.6 V
To change levels, click the button three times rapidly to cycle to the next voltage. The LED color indicates the selected setting. Start low with new or delicate oil, then increase as needed.
What is Powerwave™ technology?
Powerwave™ automatically varies the output by roughly 0.5 V lower during a draw to smooth the hit and help maintain consistent vapor production. No user action is required to enable it.
How do I use preheat?
- To start preheat, double-click the button. Preheat runs for about 15 seconds at approximately 1.8 V.
- The LED will show an animation during preheat and will stop when preheat completes.
Use preheat for thick or cold oil, or if airflow feels restricted. Allow the device to rest between sessions to avoid overheating the cartridge.
How do I vape?
- Auto-draw: simply inhale through the cartridge mouthpiece to activate.
- Button activation: press and hold the button while you inhale, then release when finished.
If you experience a tight draw, use preheat first or lower the voltage for thinner, more flavorful vapor.
How do I charge the battery?
- Ensure the device is fully assembled with the bottom base attached.
- Connect the included USB-C cable to the port on the device.
- Plug the other end into a 5 V USB power source.
- The LED shows charging status. A red LED typically indicates charging, and the light turns off when fully charged.
- When finished, disconnect the cable.
Charging tips: Do not use the device while charging. For best battery health, recharge before the battery is completely depleted.
What do the LED lights mean?
- Assembly confirmation: brief white flash when the device is reassembled.
- Battery low: red indicator or blinking pattern.
- Charging: red or colored indicator while charging.
- Full charge: LED turns off.
- Voltage selection: LED color changes to show selected level.
- Preheat: animated or pulsing pattern during the 15-second cycle.
Note: Exact LED colors and patterns can vary by production run. Follow the behaviors above as a guide.
What are the key safety and care guidelines?
- For aromatherapy use with 510-thread oil cartridges only.
- Keep within recommended cartridge dimensions to ensure safe fit and proper airflow.
- Avoid exposure to extreme heat or cold, water, or high humidity.
- Do not use the device while charging.
- Do not short the contacts. Avoid metal objects touching the 510 connection.
- Clean the 510 contact and the cartridge base with a dry, lint-free swab if residue appears.
- Store the device partially charged if unused for extended periods.
- Includes short-circuit protection and 5-minute auto shut-off for added safety.
- Keep out of reach of children and pets. Do not modify the device.
What are the technical specifications?
- Battery capacity: 600 mAh rechargeable lithium-ion
- Activation: auto-draw or button-activated
- Voltage settings: 2.2 V, 2.7 V, 3.2 V, 3.6 V
- Preheat: 15 seconds at approximately 1.8 V
- Powerwave™ Technology: automatic voltage modulation for consistent hits
- Auto shut-off: approximately 5 minutes of inactivity
- Charging: USB-C rapid charging
- Cartridge compatibility: 510 thread, up to 14 mm diameter and 65 mm height
- Protections: short-circuit protection
- Design: discreet, concealed-cartridge body for portability
How do I troubleshoot common issues?
No vapor or no activation
- Press the button five times rapidly to ensure the device is on.
- Charge the device if the LED indicates low battery.
- Remove and reinsert the cartridge to confirm a good 510 connection.
- Clean the contacts and the cartridge base with a dry swab.
- Try a lower voltage to avoid tripping protection on sensitive cartridges.
Weak hits or burnt taste
- Lower the voltage for delicate or thin oil.
- Use preheat for thick oil, then take a gentle draw.
- Allow time between puffs so the wick can resaturate.
Auto-draw not responding
- Switch to button activation and press and hold while inhaling.
- Check that airflow holes on the cartridge are not blocked by the housing.
- Preheat to loosen thick oil that may be restricting airflow.
LED blinking or error behavior
- Rapid blinking can indicate low battery or a cartridge short. Charge the device and try a different known-good cartridge.
- Inspect the 510 center pin for debris and clean carefully if needed.
Will not charge
- Ensure the bottom base is attached. The device must be assembled to charge.
- Use a 5 V USB power source and the included USB-C cable.
- Try another cable or port if the LED does not light when connected.
Why choose the Rokin BAR?
- Discreet, pocketable design with concealed cartridge
- Flexible control with auto-draw or button activation
- Four voltage settings plus Powerwave™ for smooth, consistent hits
- Long-lasting 600 mAh battery with USB-C rapid charging
- Safe and reliable with auto shut-off and short-circuit protection
What about warranty and compliance?
- Warranty: 1-year battery warranty from Rokin. Retain proof of purchase and contact Rokin support for service.
- Compliance: FCC, CE, and RoHS certified.
Important notes
- Read all instructions before use. Use only as directed.
- Do not exceed the cartridge size limits. Oversized cartridges may not fit or may impair safe operation.
- For aromatherapy purposes only. Keep out of reach of children.