Alien Ape Nectar Collector Vape Pen Manual

The Alien Ape Electric Nectar Collector is a versatile device designed for both concentrate dipping and use as a 510 thread cartridge battery. Crafted from aluminum alloy with a zinc coating, this device balances lightweight construction with durability. It features a 450mAh battery, supporting multiple sessions. Included with the Nectar Collector are a silicone container, dab tool, and charger.

To turn on the device, locate the power button typically found on the side of the device. Press the power button five times rapidly. The LED indicator will light up to confirm the device is powered on.

Preparing the Device

Ensure the device is charged using the included charger. Connect the charger to the bottom port of the device, and then plug it into a suitable power source. The pass-through charging feature allows you to use the device while charging.

Using the Nectar Collector

Remove the protective cap from the coil. Use the included dab tool to place a small amount of concentrate in the silicone container. Activate the device by pressing the power button three times rapidly to toggle to the desired voltage setting. Touch the heated tip of the Nectar Collector to the concentrate while inhaling through the mouthpiece.

Attaching the Cartridge

Screw the 510 thread cartridge onto the port located on the opposite end of the mouthpiece. Ensure that the connection is secure but not overtightened.

Vaping with the Cartridge

With the device turned on, press and hold the power button while inhaling from the mouthpiece. Release the button after each inhalation to avoid overheating the coil.

The device offers variable voltage settings for tailored vaping experiences. To adjust the voltage, press the power button three times quickly. Continue to cycle through the settings until you achieve the desired heat level.

Regular maintenance will ensure optimal performance. To clean the device, disconnect and remove all detachable components. Wipe down the exterior and mouthpiece with a clean, damp cloth. For deeper cleaning of the coil and tip, use isopropyl alcohol and allow all parts to dry completely before reassembling.

The Device Won't Turn On

If the device does not turn on, check if the battery is fully charged. Connect it to the charger and ensure a proper connection to the power source.

Weak Vapor Production

Should you experience weak vapor production, verify that there is enough concentrate in the container or that the cartridge is properly filled. Additionally, ensure that the voltage setting is appropriately adjusted for the material being vaporized.