Exxus Claro 510 Thread Vape Cart Battery Manual

The compact, yet power-packed Exxus Claro Vaporizer Cartridge Vape sets a standard for mini devices with its innovative design and advanced features. With a robust 400mAh battery, a nifty 10-second pre-heat function, and an adjustable voltage range from 1.8 - 4.2v, this cart battery vape is a class apart. Enhanced with a bright OLED screen and a complimentary keychain hole, the Exxus Claro stands out in its 510 thread vape segment. Claro's translucent body, designed to showcase its cutting-edge tech internals, comes in six vibrant colors. So, whether you prefer classic black or flashy purple, the Claro has you covered.

To turn on your Exxus Claro vape, press the large black square power button, located on the front of the device, five times rapidly. This action will activate the OLED screen, which will first display the Exxus logo before transitioning to the default display showing key data, such as your battery level, the ohm (Ω) rating of your attached cartridge, the time duration of your last hit, and your puff count.

Once turned on, press the power button once to view your home screen. The OLED screen will display:

• Battery level as a bar - indicating the remaining charge.
• Cartridge's ohm rating - showing the electrical resistance level.
• Last hit duration - time for your last vape, useful for dosing.
• Puff count - number of inhalations taken in a session.

To turn off your vape, repeat the same process used for turning it on. When switched off, the OLED screen will briefly display a "Take care" message.

To set the ideal temperature, use the "+" or "-" buttons beside the OLED screen. Press these buttons to adjust the voltage, and the screen will display the changing numbers. To reset your puff counter, hold down the power button, "+" button, and "-" button simultaneously for 3 seconds.

Pre-Heating Function

For a smoother experience, activate the pre-heat function by quickly pressing the power button twice. The display will show a 10-second countdown. Once it reaches zero, press the power button again for inhalation. Note: If no cartridge is attached, the screen will display "NO ATOMIZER".

With its universal 510 threaded connection, attaching a cartridge is simple. Screw your cartridge gently into the top of the device until it stops snugly. Do not force the cartridge to avoid damage.

To charge the device, connect a compatible USB-C cable to the port at the bottom. For the first use, ensure a 2-hour charge, and afterward, limit charging to 1 hour to extend battery life. The OLED display will show the charging status. Avoid using car chargers or power banks over 5V.

If the device flashes 6 lights 8 or 10 times in succession, stop using it immediately. These are indicators of a short circuit or low battery. Ensure correct cartridge attachment, and allow the device to cool if it becomes excessively hot.

For optimal performance, clean your vape regularly. Turn off the device and remove the cartridge. Use a q-tip moistened with isopropyl alcohol to clean the 510 thread. Periodically wipe the device with a wet wipe or cloth.

• (1) Exxus Claro Vaporizer

*DOES NOT COME WITH A CHARGING CABLE

WARNING: Avoid using power banks over 5V or charging in cars. Improper charging can damage the battery.