G Pen Connect Vaporizer For Dabs Manual

The G Pen Connect Electric Dab Rig Vaporizer by Grenco Science offers an efficient alternative to conventional wax and dab vaping. With its quick heating capabilities and user-friendly design, it ensures a smooth and powerful vaping experience. This manual is designed to help you master the functionality of the G Pen Connect for optimal enjoyment.

Ensure that the G Pen Connect Battery is fully charged before use. To turn the device on, locate the power button on the side of the device. Press the power button five times rapidly. The button will blink three times, indicating that the device is powered on. To power off the device, click the button five times again. The button will blink one time in each color (blue, green, red) to signal that it is powering down.

Connect the G Pen Connect Battery to a power source using the included micro USB-to-USB charging cable. The LED on the power button will indicate the charging status. Ensure the battery is fully charged before use to avoid any interruptions during your session.

First, remove the magnetic tank cap by gently pulling it upwards to expose the tank underneath. Using a tool of your choice, place your concentrates directly onto the center of the ceramic heating element at the bottom of the tank. Once you have loaded the tank, replace the magnetic tank cap securely.

After powering on the device, you can adjust the temperature settings by clicking the power button three times. The LED indicator will change color, showing the current voltage setting. The available settings are: Low (Blue) - 3.1V, Medium (Green) - 3.6V, High (Red) - 4.1V.

To ensure proper heating, make sure the Connect tank is screwed into the housing completely. If you encounter issues, try loosening and then tightening the tank again. Additionally, ensure the Connect Battery is fully charged. This should resolve most heating issues.

To activate the Extended Draw Mode, power on the G Pen Connect and then click the button twice. The LED indicator will start blinking, signifying that the device is heating up. Once it reaches the optimal temperature, the LED will remain solid, and the device will continue to heat for 10 seconds without needing to hold the button down. If you wish to cancel the automatic heating, simply click the button once more.

When the G Pen Connect Battery needs recharging, the LED indicator on the power button will blink red eight times when you attempt to use the device. To prevent interruptions, it is recommended to recharge the battery as soon as this happens.

The G Pen Connect is designed to work with female-jointed water pieces, compatible with glass-on-glass attachments in 10mm, 14mm, and 18mm sizes. Secure the G Pen Connect Male Glass Adapter in your water piece to begin using it comfortably with different-sized interfaces.

The G Pen Connect comes with a hemp travel pouch for convenient storage and transportation, making it easy to carry your device wherever you go.