Honeystick Stick Concealer 510 Thread Vape Cart Battery Manual

Introducing the HoneyStick Stick Concealer: A sleek, ultra-portable cartridge battery designed for simplicity and versatility. It features a robust 400mAh capacity, a button-free, draw-activated mechanism, and accommodates a variety of cartridge sizes. With adjustable voltage settings and a pre-heat mode, it elevates your vaping experience. Here's how to operate and maximize your usage of this compact yet powerful device.

How to Insert a Cartridge

1. **Ensure that the device is off** before inserting a cartridge.

2. Select a compatible 510 thread cartridge ranging from 0.5ml to 2.0ml.

3. **Gently screw** the cartridge into the battery. Be careful not to over-tighten.

How to Activate the Vape

The HoneyStick Stick Concealer is **draw-activated**, meaning it turns on automatically when you inhale. There is no need to press any buttons.

How to Adjust the Voltage Settings

1. **Attach** your cartridge first if not already done.

2. To change the voltage setting, **inhale to activate** the pen, and it will cycle through four voltage settings (2.5V, 3.0V, 3.5V, 4.0V). Experiment to find the optimal voltage for your particular cartridge and preference.

How to Use the Pre-Heat Mode

1. Before inhaling, make sure the cartridge is attached.

2. **Activate the pre-heat mode** by rapidly inhaling twice. This will start the 12-second pre-heat cycle, designed to prepare thicker oils for a smooth draw.

How to Charge the Battery

1. **Locate the USB-C charging port** on the device (typically at the bottom).

2. Connect the provided USB-C charging cable to the port, and then attach it to a compatible USB-C charging source.

3. Charge until the indicator light shows that the battery is fully charged, ensuring long-lasting usage.

Maintenance Tips

1. **Keep the device clean** by wiping the exterior with a dry cloth regularly.

2. **Avoid exposing** the vape pen to extreme temperatures or moisture.

3. When not in use for extended periods, **store the device** safely with the cartridge removed to prevent leakage or damage.

Troubleshooting

Problem: The device isn't activating.

Solution: Confirm the cartridge is properly attached and that it contains sufficient liquid. If still unresponsive, charge the battery.

Problem: Weak or no vapor production.

Solution: Check if the pre-heat mode was activated and the suitable voltage setting is selected. Re-charge if the issue persists.

For additional support, contact your HoneyStick retailer or consult the manufacturer’s website for detailed FAQs and support options.