Lookah Q7 Mini Enail Banger Dab Kit Manual

Introducing the Lookah Q7 Mini, a compact and powerful Enail for dab enthusiasts. This vaporizer boasts a sleek design and unmatched performance, perfect for those who prioritize both power and convenience in their dabbing experience.

• High-capacity 950mAh Battery
• LED Screen for Easy Control
• Variable Voltage Options: 3.2V, 3.6V, 4.0V
• 14mm and 18mm Compatibility
• Flavor-Preserving Quartz Atomizer
• Magnetic Adjustable Carb Cap
• USB-C Charging Port

• Q7 Mini Enail
• Two Replacement Coils
• Detailed User Manual

To turn on the Q7 Mini, press the power button located on the device five times rapidly. This action will power on the vaporizer and activate the LED screen display.

Adjust the desired temperature using the plus ➕ and minus ➖ buttons on the device. The temperature can be set in 5-degree increments. To switch between Celsius and Fahrenheit, press and hold the plus ➕ and minus ➖ buttons simultaneously.

1. Open the lid and place a small nugget of wax into the chamber. Then, close the lid.
2. With the device turned on, adjust the temperature as desired using the plus ➕ and minus ➖ buttons.
3. Press and hold the power button for 3 seconds to initiate preheating. The device will vibrate when the preheat cycle starts, and the screen will display the temperature as it climbs to the preset value.
4. Once the device approaches the preset temperature, it will vibrate again to indicate it's ready for use. The temperature will hold for 60 seconds.
5. Adjust airflow by covering the magnetic adjustable carb cap located in the lid as needed to enhance your dabbing experience.

1. Open the lid and clean the inside of the dish coil using a Q-tip dipped in isopropyl alcohol. Ensure you do not soak the coil to avoid damage.
2. Remove the carb cap by pressing down with one finger and unscrewing the underside with the other hand.
3. Unscrew the downstem for cleaning. It can be cleaned with the provided cleaning brush or a pipe cleaner dipped in isopropyl alcohol.
4. After all parts have been cleaned, reassemble the carb cap and downstem by screwing them back into place.

• Regularly clean the quartz atomizer to maintain optimal flavor and performance.
• Avoid overloading the chamber with wax to prevent clogging.
• Charge the device using the USB-C port when not in use to ensure a full battery for your dabbing sessions.