Precision Digital Scale By Digitul Manual

The Stache DigiTul Precision Digital Scale is an innovative tool combining a digital scale and a micro scoop dab tool in one patent-pending design. It supports precision measurements from 0.05 grams to 200 grams and is perfect for managing consumption and dosing. This manual will guide you through the setup and operation of your DigiTul scale.

The scale requires 2 x AAA batteries (not included). Follow the steps below to install them:

1. Locate the battery compartment on the bottom side of the scale.
2. Slide the battery compartment cover open.
3. Insert 2 AAA batteries, ensuring that the positive (+) and negative (-) ends are aligned with the marked terminals in the compartment.
4. Close the battery compartment securely to ensure proper contact.

Follow the steps below to power on the scale:

1. Press and hold the Power button located on the front of the scale until the display lights up.
2. Wait for the display to show "0.00g" before proceeding with any measurement.

To utilize the scoop and weigh feature for precise measurements:

1. Ensure the scale is powered on and displaying "0.00g".
2. Attach the magnetic dab tool to the scale if it is not already attached.
3. Use the scoop to pick up the substance you need to weigh.
4. Place the scoop with its contents onto the scale carefully.
5. Read the weight displayed on the screen to ensure accuracy.

Calibration is essential for maintaining measurement accuracy. Follow these steps to calibrate:

1. Turn on the scale by pressing the Power button.
2. Remove any items from the weighing platform.
3. Press and hold the Calibrate button until the display shows "CAL" or a similar indicator.
4. Using a calibration weight, place it gently on the center of the weighing platform.
5. Wait for the scale to adjust and display the weight of the calibration mass. Calibration is complete when the display shows the correct value.
6. Remove the weight and check that the scale reads "0.00g".

To conserve battery life, always turn off the scale after use:

1. Press and hold the Power button until the display turns off.
2. Ensure no objects are left on the scale to avoid accidental power-on.

• Keep the scale on a stable and level surface during use.
• Store the scale in a dry place to prevent moisture damage.
• Avoid excessive force on the weighing platform to prevent damage.
• Clean the scale with a soft, dry cloth. Avoid using any liquid or abrasive cleaning agents.
• Periodically check and replace batteries to ensure optimal performance.

With these instructions, your Stache DigiTul Precision Digital Scale will provide accurate and reliable measurements, enhancing your precision in consumption and dosing.