Wulf Mods Kodo Pro X Ray Series 510 Thread Vape Cart Battery Manual

Discover the exceptional performance of the Wulf Mods X-Ray Series Kodo Pro 510 Voltage Battery. Designed for those who demand the best from their vaping experience, this advanced device offers unparalleled control and versatility. Whether you're a seasoned vaper or new to the world of vape, the X-Ray Kodo Pro promises to elevate your sessions to a whole new level.

Ensure that the Kodo Pro is fully charged for optimal use.

• Press the power button, located on top of the digital OLED screen, five times rapidly.
• Wait for the digital OLED screen to illuminate, signaling that the device is powered on.

It is recommended to attach the cartridge while the device is turned off.

• Take your refillable or prefilled cartridge.
• Connect it to the 510-threaded link by turning it clockwise.
• Avoid overtightening—stop when you feel resistance to ensure the battery reads the cartridge correctly.
• To remove, turn the cartridge counterclockwise.

Make sure the vape is powered on first.

• To increase the voltage, press the (+) button located on the right side of the device.
• To decrease the voltage, press the (-) button on the left side.
• Adjust the voltage in increments of 0.1 volts and release the button when you reach your desired setting.

Ensure the device is powered on before activating preheat mode.

• Press the power button twice quickly to activate the 10-second preheat mode.
• Press the power button twice again to cancel the preheat function.

• With the device turned on, long press the power button for three seconds.
• The device will heat for 15 seconds during sesh mode. The OLED screen will display "Over Time" when the 15 seconds conclude.

• Ensure the device is on and view the digital OLED display.
• Locate the puff counter at the lower left of the screen ending with the letter "P."
• The counter resets automatically at 9999. To reset sooner, press the power button and the (-) button simultaneously.

Charging Instructions

• Use a USB-C charging cable. Connect the USB-C tip to the device and the other end to a wall charger.
• Charging from a computer is possible if a wall charger is unavailable.
• Stick to the recommended initial two-hour charge, limiting future charges to one hour.

Cleaning Instructions

• Detach the cartridge as previously described.
• Use a cotton swab to gently clean the 510-threaded connections and metal contacts on the cartridge.
• For any oil spills or smudges on the body, wipe with a dry cloth or paper towel.

Additional Tips

• Avoid using power banks or charging in vehicles to prevent battery issues.

• Acquire a lanyard or wrist lace (note: not included).
• Insert the lanyard loop into the designated area on the side of the device.

• (1) X-Ray Series Kodo Pro 510 Variable Voltage Battery