Wulf Mods Recon 4G 510 Thread Dual Vape Cart Battery Manual

Introducing the Wulf Mods Recon 4G Dual Cartridge Vaporizer. This product is crafted for versatility and enhanced vapor output, allowing the simultaneous use of up to two 2g cartridges. With its advanced features, the Recon 4G provides a groundbreaking and customizable vaping experience.

To power on the Recon 4G, press the power button located on the main body of the device 5 times in rapid succession. Once successfully activated, your OLED screen will display "Recon 4G" before switching to the home screen.

Begin by loading your 510 threaded cartridges with your desired concentrate or oils, ensuring no spillage occurs. Remove the bottom segment of the Recon 4G by pulling on its magnetic connection to access the two cartridge ports. Screw one or more cartridges into the device and ensure they are properly connected. Place the magnetic bottom piece back into the body, and you will hear a satisfying click when correctly installed. If resistance is felt, flip the bottom and try again as the device can only be assembled one way.

Your Recon 4G offers five voltage settings: 1.8V, 2.4V, 3.0V, 3.6V, and 4.2V. To check the current voltage, press the power button once to see the home screen. To change the voltage, press the power button three times rapidly. The OLED will display a full-screen version of the voltage setting. Press the power button repeatedly to cycle through options. Wait for the home screen to confirm the setting is locked.

To activate preheating, tap the power button twice. The OLED screen will show a 10s countdown, indicating that the cartridges are warming up. When the countdown reaches 10, it will flash, indicating the cartridge is ready for a puff.

Located at the bottom right above the USB-C port, the toggle switch allows for quick cartridge selection. Flick the switch to choose between the left (L), right (R), or both (D) cartridges. The current setting is also displayed on the OLED screen above the puff counter.

The puff counter, found on the OLED screen beneath the cartridge indicator, assists in tracking use for precise dosing. To reset, click the power button 4 times. The counter will then read “0000” and start fresh.

Before first use, charge the device for 1.5 hours or until the battery level reads 100%. Use a compatible USB-C power source. Avoid charging for over 1.5 hours to prevent battery issues.

Be aware of several warnings. The Overtime Warning activates when the power button is held for more than 15s, and the screen flashes. The Auto Shut Off feature powers down the device after 5 minutes of inactivity. The Cartridge Detection Warning alerts when attempting to vape without cartridges or with an empty one.

Ensure the device is powered down and empty before cleaning. Use a cloth or wipe to clean the mouthpiece. Clean the 510 threaded connectors with a q-tip dampened in isopropyl alcohol, ensuring they are dry before reuse.