Yocan Evolve Plus Xl Dab Pen Vape Battery Manual

The Yocan Evolve Plus XL Dab Pen is an innovative, pocket-sized device designed for convenient use with wax concentrates. This manual provides step-by-step instructions for using and maintaining your Yocan Evolve Plus XL Dab Pen, ensuring optimal performance and reliability.

Follow these steps to prepare your device for the first use:

1. Charge the Yocan Evolve Plus XL using the charging port located at the bottom of the device until fully charged.
2. Power on the vaporizer by pressing the power button 5 times in quick succession. The power button is an oblong-shaped button located on the middle part of the battery.
3. Sterilize the coils by pressing and holding the power button for 5 seconds, repeating this action two or three times. This step is crucial for removing any impurities from the manufacturing process.
4. Let the device rest for 2–3 minutes before loading your concentrate.

Instructions for loading your device with wax concentrates:

1. Detach the built-in concentrate chamber found at the bottom of the device.
2. Ensure the device is sanitized by following the preparation steps above.
3. Pull the mouthpiece upwards to access the Yocan Quad Coils.
4. Move the coil caps counterclockwise to expose the coils.
5. Load your desired amount of concentrate onto the coil, avoiding direct contact with the coils using a metal tool.
6. Return the coil cap by twisting it clockwise, being careful not to overtighten.
7. Return the mouthpiece by aligning it with the magnetic connection.

Follow these steps for an optimal vaping experience:

1. Ensure that your vaporizer is fully charged, sterilized, and loaded with concentrate.
2. Place the mouthpiece to your lips and prepare to draw.
3. Press and hold the power button to begin vapor production.
4. Inhale from the mouthpiece and repeat the steps as needed.

It is essential to keep your device clean for continued performance:

1. Power on the device by pressing the power button 5 times. Use another 5 presses to turn it off.
2. Turn the vaporizer upside down.
3. Perform a burn-off by pressing the power button for 5 seconds, 2–3 times, to melt any residue.
4. Allow the device to cool down.
5. Dismantle by using both magnetic and threaded connections, turning counterclockwise where necessary.
6. Clean any residue using a dry paper towel, then reassemble the device.