Yocan Uni S Vape Cart Battery Manual

The Yocan UNI S Vape Battery is an advanced device designed for use with 510-thread cartridges, boasting a metallic body, USB Type-C charging, adjustable cartridge settings, and three preset temperature profiles. To ensure you make the most of its features, the following manual provides step-by-step instructions on using and maintaining your Yocan UNI S.

1. Connect your USB Type-C cable to the charging port located on the bottom of the device.
2. Plug the other end of the cable into a suitable power adapter or USB port.
3. Leave the device to charge until it reaches full battery capacity before its first use.

1. Press the power button, which is a squarish (octagon) button located at the upper front part of the device above the Yocan branding, five times quickly to turn on the device.

1. Attach the magnetic ring to your 510-thread cartridge.
2. Slide the combination of the magnetic ring and cartridge into the cartridge chamber.
3. Ensure the magnets snap securely together, but avoid overtightening.

1. Ensure the Yocan UNI S is fully charged.
2. Verify the cartridge and magnetic connector are properly connected.
3. Press the power button five times to activate the battery.
4. Select your preferred temperature setting.
5. Press and hold the power button.
6. Inhale from the mouthpiece when vapor starts to produce.

1. Ensure the battery is powered on by pressing the power button five times.
2. Press the power button three times to cycle through the heat settings.

• Low – 2.5 volts (One LED light)
• Medium – 3.0 volts (Two LED lights)
• High – 3.5 volts (Three LED lights)

1. Use a dry paper towel to wipe off any dirt or residue on the battery, ensuring metal connections are clean.
2. Follow charging instructions and use the provided USB Type-C charger exclusively for charging to avoid damage.