Yocan Verve 510 Thread Vape Cart Pen Battery Manual

Yocan Verve 510 Thread Vape Cart Pen Battery Manual

The Yocan Verve Cartridge Vaporizer is designed for elegance and portability, housing a powerful 450mAh battery with advanced features such as variable voltage and draw-activation for a seamless vaping experience. This manual provides step-by-step guidance on using and maintaining your Yocan Verve Cartridge Vaporizer.

How to Charge the Yocan Verve Cartridge Vaporizer

  1. Take your USB type-C charging cable.
  2. Connect it to the charging port located at the bottom of the Yocan Verve Cartridge Vaporizer.
  3. Find a compatible wall adapter or wall charger.
  4. Plug the wall adapter into a wall socket.

Note: Make sure to use a compatible wall adapter and charging cable when charging the Yocan Verve Cartridge Vaporizer. The charging cable is not included in the box.

How to Prepare the Yocan Verve Cartridge Vaporizer

  1. Ensure the Yocan Verve Cartridge Vaporizer is fully charged.
  2. No buttons are required to activate the device; simply inhale from the mouthpiece as it is draw-activated.

How to Load the Yocan Verve Cartridge Vaporizer

  1. Take your pre-filled cartridge out of its packaging.
  2. Connect the cartridge to the 510-threaded connection on the base of the vaporizer.
  3. If using a refillable cartridge:
    • Remove the mouthpiece from the cartridge.
    • Load your preferred oil or wax in the cartridge.
    • Place the mouthpiece back onto the cartridge.
    • Connect the cartridge to the 510-threaded connection.

How to Change the Voltage Level on the Yocan Verve Cartridge Vaporizer

  1. Ensure the Yocan Verve Cartridge Vaporizer is fully charged.
  2. Since it is draw-activated, there is no need to turn it on.
  3. Inhale from the mouthpiece three times to change the voltage level.
  4. Check the light bar at the bottom to determine the active voltage level:
    • 2.0 volts (White Light)
    • 2.6 volts (Blue Light)
    • 3.2 volts (Green Light)

How to Activate the Pre-Heat Setting

  1. No activation is needed as the vaporizer is draw-activated.
  2. Inhale from the mouthpiece two times to activate the pre-heat setting.

Note: The pre-heat setting will heat the oils at a very low temperature of 1.8 volts for 10 seconds.

Yocan Verve Cartridge Vaporizer Care and Maintenance

  1. Ensure the Yocan Verve Cartridge Vaporizer is off.
  2. Remove the cartridge and either clean it or replace it as needed.
  3. Use a dry paper towel or a cloth to clean the body of the vaporizer.
  4. Allow all parts to dry out before reassembly.
  5. Avoid draining the battery if storing the vaporizer for an extended period.