Yocan Wulf Flat Plus 510 Thread Cart Vape Pen Battery Manual

Enhance your vaping experience with the Wulf Flat Plus Cartridge Vaporizer, available in nine different colors including Teal-Black Spatter, Black-Red Spatter, and Purple-Black Spatter. Designed with a 510-thread connection, this device ensures optimal flexibility and compatibility with a variety of cartridges.

Key Features and Specifications

• Wulf Flat Plus Cartridge Vaporizers
• 510-thread connection for versatile cartridge compatibility
• Adjustable voltage settings for customizable vaping experiences
• 10-second preheat function
• Powered by a 900mAh battery for extended use
• Type-C charging port for quick and efficient charging
• Button activation with a 15-second safety cut-off

Step 1: Connect a USB-C charging cable to the port located at the base of the vape battery.

Step 2: Plug the other end of the cable into a suitable power source. Charging is in progress when the LED indicator lights up.

Step 3: Once fully charged, carefully disconnect the charging cable.

Step 1: Locate the power button positioned at the upper part of the battery.

Step 2: To power on the device, press the power button five times quickly. The LED indicator will light to confirm the device is on.

Step 3: To power off, press the power button five more times. The indicator light will turn off.

Step 1: Ensure the device is powered on.

Step 2: Press the power button twice quickly to toggle through the pre-set voltage settings:

• Low – 2.6V – White Light
• Medium – 3.2V – Green Light
• High – 3.8V – Red Light

Step 3: Release the button once your desired voltage level is selected.

Step 1: Make sure your cartridge is attached properly.

Step 2: Press the power button twice to activate the 10-second preheat function.

Step 3: Wait until the preheat cycle is complete before vaping.

For Wax Coils:

Step 1: Inspect the 510-threaded connections for any obstructions and remove debris if necessary.

Step 2: Connect the wax coil by twisting it clockwise until resistance is felt.

Step 3: Use a dab tool to place wax on top of the coil, avoiding contact with the coil metal.

Step 4: Replace any necessary accessories onto the coil, such as a mouthpiece.

For Oil Cartridges:

Step 1: If using a refillable cartridge, fill it with oil before attaching to avoid spillage.

Step 2: Check 510-threaded connections, clear obstructions as needed.

Step 3: Screw the oil cartridge in by twisting it clockwise until resistance is felt.

Step 4: Replace any necessary accessories like a mouthpiece.

Step 1: Ensure the battery is charged, sterilized, and loaded with concentrates or oils.

Step 2: Select the desired voltage setting.

Step 3: Place your lips onto the mouthpiece.

Step 4: Press and hold the power button while inhaling.

Step 5: Enjoy your session and repeat as needed.

Step 1: Power off the device by pressing the power button five times.

Step 2: If using a wax coil, invert the device and perform a burn-off by pressing and holding the power button for 2-3 seconds, repeat if necessary.

Step 3: Let the device cool before unscrewing the 510-threaded attachment for cleaning.

Step 4: Clean connections with a cotton swab and any battery residues with a dry paper towel.

Step 5: Reassemble the device for future use.

The Yocan Wulf Flat Plus comes with one vape pen battery and does not include a USB-C charging cable. The device is designed for easy use and maintenance, making it suitable for both new and seasoned users.