Yocan Wulf Uni Pro X Ray Series 510 Thread Vape Cart Battery Manual

Experience unmatched vaping with the Yocan Wulf Mods X-Ray Series Uni Pro 510 Cartridge Vaporizer, a revolutionary collaboration between Yocan and Wulf. This device integrates features such as adjustable voltage, a 10-second preheat feature, and an OLED display, providing a superb vape cart experience.

How to Turn On the Yocan Wulf Uni Pro X-Ray Series 510 Thread Vape Cart Battery

To begin using your device, ensure it is properly charged.

  1. Press the power button, which is located at the front of the battery, above the OLED display, five times rapidly.
  2. The device will power on, and the screen will illuminate, indicating it is ready for use.

How to Load the Yocan Wulf Uni Pro X-Ray Series Box Mod Vaporizer

  1. Prepare your 510-thread cartridge, ensuring it is safe and stable to prevent any damage.
  2. Attach the cartridge to the inclusive 510-threaded magnetic connector.
  3. Insert the 510-threaded attachment into the magnetic adapter and lightly twist until resistance is felt. Avoid overtightening.
  4. Slide the cartridge into the device chamber until you hear a 'snap'.
  5. Use the adjustment tools for width and height inside the chamber to ensure the cartridge fits snugly. Width is adjustable from 6mm to 14mm, and height has three settings.

How to Use the Yocan Wulf Uni Pro X-Ray Series Box Mod Vaporizer

To begin vaping:

  1. Ensure the device is powered on and a cartridge is loaded.
  2. Press the power button five times to activate the device.
  3. Place your lips on the cartridge mouthpiece.
  4. Press and hold the power button. Begin to draw from the mouthpiece once vapor is generated.
  5. Repeat as necessary until the e-liquid is consumed.

How to Adjust Temperature Settings on Yocan Wulf Uni Pro

One advantage of this device is its precise voltage control:

  1. Use the left button to decrease and the right button to increase voltage in 0.1V increments.

How to Activate Preheat Mode

The preheat function can be activated as follows:

  1. Press the power button twice quickly to start the preheat cycle.
  2. Press twice again if you need to stop preheating.

How to Charge the Yocan Wulf Uni Pro X-Ray Series Box Mod Vaporizer

Maintain battery health with these charging steps:

  1. Initially, charge the device for two hours using the included Type-C cable.
  2. After initial charging, limit charging time to one hour or less.
  3. To turn off the device, press the power button five times rapidly.

Care and Maintenance for Your Device

  1. Regularly wipe the device with a dry paper towel to remove any residue.
  2. Clean the magnetic contacts to ensure stable electricity flow.
  3. Use only the dedicated charger to prevent battery damage.

What's Included with the Yocan Wulf X-Ray UNI Pro

Your Box includes:

  • 1 Type-C Cable for easy charging
  • 1 Magnetic 510 Ring for cartridge attachment
```