Ccell Palm Pro 510 Thread Battery Manual

The CCELL Palm Pro 510 Thread Vape Cart Battery is designed to offer a streamlined vaping experience with customizable settings for voltage and airflow. This manual provides detailed instructions on its operation and features.

Screw the 510 thread magnetic connector onto your cartridge.

Insert the cartridge into the slot of the device.

Draw directly from the cartridge to activate vaping. Note that the battery will automatically cut off any session longer than 10 seconds to prevent overheating.

It is recommended to remove the cartridge when not in use to avoid residue buildup.

Utilize the innovative airflow collar on the Palm Pro to control your draw:

• Rotate the collar to the left for a wide open setting, providing a gentle draw, pristine flavor, and cooler vapor.
• Align the collar to the middle for a balanced mix of flavor and vapor volume.
• Rotate the collar to the right for minimal opening, yielding robust and flavorful vapor.

Double-tap the power button (located on the side of the device) quickly to activate preheating.

A full preheat session lasts 10 seconds, during which all LED lights will blink.

To end preheating early, press the power button again.

To start vaping before preheating completes, simply draw from the cartridge.

During inhalation, the LED lights will indicate the current voltage setting:

• 2.8V for emphasizing flavor.
• 3.2V for a harmonious blend of flavor and vapor.
• 3.6V for amplified vapor output.

The default voltage is set at 2.8V. To change the voltage setting, long-press the power button. The LED light(s) will blink three times to confirm the voltage in use.

To check battery level when not charging, short-press the power button:

• LEDs indicate battery levels: ≥70%, 40%-70%, 10%-40%, <10%.

How to Charge the Device

Remove the cartridge before charging.

Insert a USB-C cable into the charging port to start charging. A full charge takes approximately 90 minutes.

• The LED indicator will blink to show charging status: ≥70%, 40%-70%, <40%.
• All three light bars blink three times when fully charged.
• Detaching the charging cable will cause the lights to blink five times.

Do not leave the device unattended while charging, and avoid charging overnight.

• Charger power supply: 5V, ≥500mA
• Charging temperature: 50-113°F (10-45°C)
• Working temperature: 32-140°F (0-60°C)
• Storage temperature: 64-82°F (18-28°C)
• Operating humidity: 35%-70%RH
• Storage humidity: 35%-70%RH

• Do not expose device to water or flammable substances.
• Avoid use in wet environments or extreme temperatures.
• Prevent prolonged exposure to direct sunlight.
• Avoid contact of other metals with battery's electronic components.
• Keep out of reach of children and pets.
• Avoid dropping or disassembling the device to prevent injury or damage.
• Follow local guidelines for recycling or disposing of the lithium-ion battery.
• Do not dispose of in fire to prevent explosion or injury.