Hamilton Devices Cube Vape Cart Battery Manual

The CUBE vape battery from Hamilton Devices is an innovative, inhale-activated auto-draw device designed with a robust Zinc Alloy housing and compatible with various cartridges. This manual will guide you through setting up and using your device effectively.

• Screw the cartridge into the 510 thread connector located at the top of the device. Ensure the cartridge is compatible, specifically slim wax or CCELL® ceramic vape cartridges, or similar 510 cartridges.
• Do not attempt to use a non-compatible cartridge, as it might not function properly or might damage the device.

• The CUBE device is inhale-activated, meaning you only need to inhale through the cartridge to activate its function. There is no power button to press.
• Ensure the device is charged for optimal performance.

• Locate the micro-USB port at the bottom of the device.
• Connect the provided USB charger to a power source and then plug it into the micro-USB port to charge.
• Charging typically takes about 1.5 hours.
• Charge the device approximately once a week, depending on usage, as it has a 560mAh battery capacity.

• Battery Capacity: 560mAh
• Voltage Range: 2.0V-3.7V
• Dimensions: 32mm (L) x 32mm (W) x 32mm (H)
• Connector Type: 510 Thread

Device Not Activating on Inhale

• Ensure the cartridge is properly screwed into the connector.
• Check if the battery is charged sufficiently.

Device Not Charging

• Ensure the USB charger is connected securely to both the device and power source.
• Try using another compatible charging cable or power adapter.

Always ensure the device is used and stored correctly to maintain its longevity and performance. For a full range of troubleshooting tips, visit the official Hamilton Devices website.