Ooze Booster Dab Pen Vaporizer Manual

Welcome to the Ooze Booster Dab Pen Vaporizer manual. This guide will assist you in setting up and using your device efficiently. Ensure to register your device before first use to activate the warranty. Your authenticity code can be found on the card in the Booster package.

To activate your warranty and ensure your device is genuine, please register your Ooze Booster using the authenticity code provided on the enclosed card in your package.

1. Twist the mouthpiece like an ignition key to open the device.
2. Load your dab into the Onyx Atomizer. It is recommended to use a Hot Knife for this step.
3. Replace the mouthpiece cap.
4. Click the button, located on the side of the device, 5 times rapidly to turn it on.
5. Select a temperature by clicking the button 3 times. The Booster has three temperature levels to choose from.
6. Once a temperature is selected, you’re ready to dab!

1. Load the Booster the same way as if you were using it as a dab pen.
2. Remove the bottom cap of the device.
3. Insert the adapter into a 14mm water pipe.
4. Heat the device by following the temperature selection process.
5. Take a hit from the rig and pull it out of the downstem to clear the vapor.

The Booster offers two ways to heat up the Onyx Atomizer. Manual Mode is the traditional method:

1. Once you’ve loaded your dab and selected your desired temperature, simply press the button to heat the device as you inhale.

If you prefer not to hold the button down while you vape, use Sesh Mode:

1. Once your dab is prepared, click the button twice.
2. The Booster will heat continuously for 15 seconds, which works best when using the water pipe function.

The Ooze Booster comes with a Type-C charger cable for pass-through charging, allowing you to use the device while it charges:

1. Connect the Type-C charger to the charging port on your Booster.
2. Plug it into a compatible power source.

Here are some common troubleshooting tips:

• If the device is not turning on, ensure it is fully charged and that you are clicking the power button 5 times rapidly.
• If the vapor is thin, consider adjusting the temperature setting or ensuring the atomizer is clean and adequately loaded.

Regular cleaning ensures optimal performance:

• After using, allow the device to cool and disassemble the atomizer for cleaning.
• Use alcohol wipes or the Ooze Resolution Wipes to clean the residue from the atomizer and device parts.
• Ensure all components are dry before reassembling.

By following these steps, you will ensure a fulfilling vaping experience with the Ooze Booster Dab Pen Vaporizer, enjoying its versatile functionality and superior performance. Happy vaping!