Ooze Duplex 2 510 Thread Vape Cart Battery Manual

Discover how to make the most of your Ooze Duplex 2 Dual Use Vaporizer with this comprehensive product manual. Designed for both 510 cartridges and wax concentrates, this device offers unparalleled versatility and performance.

The Ooze Duplex 2 device is controlled via a trigger-style button on the side. To turn on the device, press the trigger button 5 times in quick succession. The same method is used to turn it off.

Connecting Your Cartridge

• Pull the base out of the Duplex 2 to access the cartridge slot.
• Screw in your 510-thread oil cartridge into the base.
• Reattach the base to the device. The Duplex 2 will confirm connection with a buzz, thanks to its IntelliThread technology.

Adjusting Voltage and Inhaling

• Click the trigger button 3 times to cycle through the four voltage settings: 2.7V, 3.2V, 3.7V, 4.2V.
• Inhale by either pressing the trigger button while taking a puff or simply taking a puff, as it is an auto-draw device.

Setting Up the Atomizer

• Remove the base of the device and screw in the Onyx Atomizer in place of the cartridge.
• It’s recommended to screw the bucket into the base before loading your dab, providing a better grip.

Loading and Using the Onyx Atomizer

• Load a dab into the center of the azul ceramic dish within the Onyx Atomizer.
• We suggest using an electric dab tool to prevent wastage.
• To take a hit, hold the trigger button down for 1-2 seconds to prime the azul ceramic, then inhale.
• Use your finger as a carb cap by covering the hole on the base to control airflow. Enjoy big flavorful hits!

Setting Up the Nectar Tip

• Screw the XL tip onto the bottom of the base so it protrudes and is not concealed.

Using the Nectar Tip

• Skip loading the dab; just dip the nectar tip directly into your wax concentrate jar.
• Activate the auto-draw function by inhaling—no button press is necessary!

The Duplex 2's IntelliThread technology recognizes the accessory attached, adjusting the coil resistance automatically for optimal airflow and performance. Whether you attach a cartridge, the Onyx Atomizer, or the XL tip, you'll receive robust and rich flavor with every use.

• Ensure the device is powered off for faster charging.
• Connect the supplied USB-C cable to the USB-C charging port, located under the trigger plate near the charging port, and the other end to a wall adapter plugged into an outlet.
• The 4 LED lights will indicate battery levels, lighting up sequentially as the device charges.
• The device supports pass-through charging, allowing usage while it's charging.

Remember to register your Ooze Duplex 2 to activate the warranty with the authentication code found under the trigger plate near the charging port.