Ooze Verge 2500 Mah Dry Herb Vaporizer Manual

Meet the Verge Dry Herb Vaporizer by Ooze, the pinnacle of Ooze's C-Core collection and a revolution in dry herb vaping. Featuring a large 0.5g chamber and our unique Nano-Glazed ceramic technology, the Verge ensures an exceptionally smooth experience. Its innovative triple heating system — conductive, convective, and far infrared — guarantees efficient and even vaporization, maximizing the flavor and lifespan of your herb. The Verge stands out with its energy-efficient design, offering 10-12 full sessions per charge. Its even heating prevents the common problem of unevenly toasted buds, ensuring no waste and a consistently pleasant taste. Cleaning is a breeze thanks to the detachable magnetic heating pod. Experience the next level of dry herb vaping with the Ooze Verge, where efficiency and enjoyment meet.

Before using your Verge for the first time, register your device to activate the warranty. Your authenticity code can be found on the card in the Verge package.

1. Pull the magnetic mouthpiece cap off the device.
2. Pack up to ½g of herbs in the Nano-Glazed chamber. We recommend a medium grind; not too chunky and not too fine or powdery.
3. Use your finger to gently press down on the top of your herbs, but don’t stuff them down there to ensure good airflow.
4. Press the button located on the side of the device 5x to turn the device on. The pulse wave tech will buzz, and the screen will be covered in slime.

1. When you turn the Verge on, it will automatically be set to the temperature you used during your previous session.
2. Use the Up and Down arrows to change the temperature one degree at a time (302-446°F/150-230°C).

Tip: Experiment with different temperatures to find your preferred sweet spot! For strong, tasty flavors, try in the range of 375-400°F. For bigger, more robust clouds, set it to 400°F or higher.

How to Switch Between Celsius and Fahrenheit

• Press both Up and Down arrows at the same time to switch between Celsius and Fahrenheit.

1. The Verge will automatically be set to the session timer duration you used during your previous session.
2. Press the button 3x to change from temperature selection to the session timer.
3. Use the Up and Down arrows to select a sesh duration in 30-second increments from 3 minutes up to 6 minutes.

1. Once you’ve selected your temperature and sesh time, press and hold the button for 2 seconds to start heating.
2. Watch the temperature climb on the screen, and the device will buzz once it reaches your temp.
3. The Verge will maintain your desired temperature until the session timer runs out.
4. To pause your sesh, press and hold the button for 2 seconds.
5. When the sesh is paused, you can adjust the temperature using the Up and Down arrows.
6. To restart the session, press and hold the button for 2 seconds. If you chose a new temp, the device will adjust and buzz again once it reaches the new temperature.

1. Remove the magnetic mouthpiece from the Verge.
2. Replace the mouthpiece with the magnetic water pipe adapter. It will click into place.
3. Turn the Verge upside down and insert the adapter into the downstem of your bong.
4. Start your session and enjoy smooth bong rips!

Cleaning

Maximum Efficiency = Minimal Cleaning!

1. Once you’ve vaped all you can vape from your herbs (they’ll be totally brown and stop tasting so good), you’ll want to clean out the chamber.
2. Remove the mouthpiece and set aside.
3. Firmly pinch both sides of the magnetic heating pod, and pull it out of the device.
4. Dump the dry remains of your herbs out into a jar or onto a rolling tray. Don’t throw them out!
5. Use the included cleaning brush to remove any stubborn debris.
6. Place the heating pod back in the device and replace the mouthpiece.

How to Charge the Verge

Your Verge includes a type-C charging cable.

1. Plug this into the port in the bottom of the device and into an adapter for a wall outlet.
2. The battery percentage is always displayed in the top right corner of the screen when the Verge is on.
3. While charging with the device turned on, the battery icon in the corner will show a charging symbol.

Charging from Off or Dead

• If battery power is under 10%, the large battery icon will be red.
• If battery power is 10-90%, the large battery icon will be yellow.
• The battery icon turns green & shows a full battery icon when fully charged.

Always charge the Verge with a wall adapter and charge using a wall outlet. Never charge it in a vehicle or use a port that is not connected to a wall to ensure your device remains covered under warranty.