Pocket Plasma Portable Dab Pen And 510 Cart Battery Manual
The HoneyStick Pocket Plasma Portable Dab Pen and 510 Thread Vape Cart Battery is a versatile device designed to offer dual functionality for dabbing and vaping. This manual will guide you through the operations of your HoneyStick device to ensure you enjoy its full potential.
How to Turn On and Off the HoneyStick Pocket Plasma
To turn on the Pocket Plasma, locate the power button on the side of the pen. Press it five times rapidly. The power button will illuminate, indicating the device is on. To turn off the device, repeat the process by pressing the power button five times quickly.
How to Select Temperature Settings
The Pocket Plasma features three customizable temperature settings:
- 3.2V (Green light)
- 3.6V (Blue light)
- 4.0V (White light)
To change the temperature, click the power button three times rapidly. The color of the light will change according to the voltage setting.
How to Use the 10-Second Preheat Function
To activate the preheat function, click the power button two times quickly. A blinking green light will indicate that the preheat function at 2.0V is active. To cancel the preheat, press the power button once.
How to Use the Pocket Plasma for Dabbing
- Remove the magnetic mouthpiece to access the quartz glass heating chamber.
- Using the provided dab tool, place a small amount of wax or concentrate into the chamber.
- Reattach the magnetic mouthpiece securely.
- Set your desired temperature using the instructions above.
- Inhale through the mouthpiece while pressing and holding the power button.
How to Use the Pocket Plasma with 510 Thread Vape Carts
- Ensure the device is powered on.
- Screw the 510 thread cartridge onto the threaded connection until secure.
- Adjust the temperature as needed using the instructions above.
- Inhale through the cartridge while pressing and holding the power button.
How to Charge the Pocket Plasma
The Pocket Plasma is equipped with USB-C charging capabilities:
- Connect the provided USB-C cable to the charging port located at the bottom of the device.
- Plug the other end into a USB power source. It supports rapid charging at 5V/1A.
- A full charge takes approximately 1.5 hours.
- While charging, the device's indicator light will glow, and it will turn off once fully charged.
Maintenance and Care
- Regularly clean the magnetic mouthpiece and the quartz glass heating chamber for optimal performance.
- Avoid overloading the chamber to prevent clogs and ensure better vaporization.
- Store the device in a cool, dry place when not in use to prolong its lifespan.
By following these instructions, you can make the most of your HoneyStick Pocket Plasma and enjoy an exceptional vaping experience with both wax and cartridges.