Wulf Mods Evolve Plus Xl Duo 2 In 1 Vape Kit Dab Pen Manual

The Yocan Wulf Evolve Plus XL Duo: 2-in-1 Dab Pen & Dry Herb Vaporizer is designed to cater to both wax and herb enthusiasts. Featuring a powerful 1400mAh battery and convenient Micro-USB charging, this device is a versatile addition to any vaping collection.

Press the power button located on the middle part of the battery five times consecutively to turn on the device. The button is oblong-shaped and situated outwards on the vaporizer battery. This same action can be repeated to turn the device off.

Connect the Micro-USB cable to the charging port, usually found at the bottom of the device. Plug the other end into a power source. Allow the device to fully charge before use to maximize battery life.

Initial sterilization is necessary to clear any impurities. After charging, press and hold the power button for five seconds, repeating this two to three times. Allow the device to rest for 2-3 minutes after sterilization.

Steps for Wax Usage:

1. Detach the built-in concentrate chamber from the bottom of the vaporizer.
2. Remove the mouthpiece to reveal the coils. Be careful not to touch the coils with any metal to avoid damage.
3. Use a dab tool to gently place the desired amount of wax on the coil.
4. Replace the mouthpiece securely.

Steps for Herb Usage:

1. Grind your herbs finely to ensure efficient vaporization.
2. Remove the mouthpiece to access the coils.
3. Load the ground herbs into the coil chamber, being careful not to overpack.
4. Replace the mouthpiece.

After loading, press and hold the power button. Place your lips on the mouthpiece and inhale the vapor. Repeat until your concentrates or herbs are consumed fully.

Steps for Cleaning:

1. Power on the device by pressing the power button five times, and then turn it off by repeating the action.
2. Flip the vaporizer upside down and conduct a burn-off by holding the power button for five seconds. Repeat this process two to three times to remove residue.
3. Allow the vaporizer to cool down.
4. Dismantle the device by pulling apart magnetic connections and unscrewing threaded parts counter clockwise.
5. Wipe any liquid residue with a dry paper towel.
6. Reassemble the vaporizer once clean.