Yocan Cylo Wax Pen Vaporizer Manual

Experience the Future of Wax Vaping with the Yocan Cylo Vaporizer. This advanced portable wax vaporizer, equipped with precision temperature control and customizable LED lighting, is designed to enhance your vaping experience. Built to cater to both casual users and intense vapers, the Yocan Cylo Vaporizer combines functionality with style.

1. Connect a USB Type-C charging cable to the port located at the bottom or base of the Yocan Cylo Vaporizer, just below the “+” and “-” buttons.
2. Plug the other end of the charging cable into a power outlet using a power brick. For alternative options, connect it to a desktop, laptop, or compatible game console.

Note: Ensure the device is fully charged before initial use for optimal performance.

1. Make sure the Yocan Cylo Vaporizer is fully charged.
2. Press the power button, located below the atomizer base and above the thin-film transistor (TFT) screen, five times quickly to power on the device.
3. Check the battery level on the TFT screen.

1. Prepare your wax concentrates using the included dab tool.
2. Remove the mouthpiece by pulling it away from the magnetic atomizer base.
3. Use the dab tool to place your desired amount of wax on the C4-DE Plus Coil.
4. Replace the mouthpiece by sliding it back in place until the magnetic links lock securely.

Note: Avoid removing the mouthpiece or coil while they're still hot to prevent damage and burns.

1. Ensure the device is powered off and cooled down.
2. Remove the mouthpiece.
3. Twist the coil counterclockwise to loosen and remove it from the base.
4. Screw in a new coil clockwise.
5. Replace the mouthpiece on the base.

Note: The package includes a replacement coil for convenience.

1. Ensure the battery is fully charged, the coil is correctly installed, and the device is loaded with wax concentrates.
2. Press the power button five times quickly to activate the battery.
3. Press and hold the power button to vaporize the wax concentrates.
4. Repeat until the extracts are consumed.

1. Power on the device by pressing the power button five times quickly if necessary.
2. Press the “+” button to increase the temperature for more potent vapor.
3. Press the “-” button to decrease the temperature for more flavorful vapor.
4. Leave the buttons once your preferred temperature level is set; the device will automatically read your selection.

Yocan Cylo Voltage Range: 2.0 volts to 4.2 volts

1. Pull the mouthpiece until the magnetic connection is released.
2. Align the mouthpiece and device to reconnect the magnets.
3. Wait for the magnetic base and mouthpiece to snap back in place.

Note: Clean the magnet connection base when removing the mouthpiece for clean sessions.

1. Use a dry paper towel or alcohol wipes to clean any dirt or residue on the battery.
2. Follow charging instructions and always use the dedicated charging cable to maintain the device's lifespan.
3. When maintaining coils, avoid using hard objects on the heating element. Replace damaged coils immediately.