Yocan Ican Electric Dab Rig Vaporizer Manual

Experience unparalleled vaping with the Yocan iCan e-Rig Vaporizer, a modern and portable electric dab rig designed for both novices and experienced users. This cutting-edge vaporizer promises exceptional performance and ease of use, making it the perfect addition to any vaping collection.

• Ensure to use the USB type-C charging cable included in the packaging of the Yocan iCan e-Rig Vaporizer.
• Connect the USB charging cable to a wall adapter and plug the wall adapter into a wall outlet.
• Attach the other end of the charging cable to the Yocan iCan e-Rig Vaporizer. The charging port is located at the bottom part of the coil light button.
• Note: You can also connect the charging cable to your computer or any compatible USB port.

• Ensure the vaporizer is fully charged for optimal performance.
• Press the power button, located at the front of the vaporizer (a rectangular button with grooves, between the iCan branding and the Yocan logo), five times quickly to power it on.
• To turn it off, press the power button another five times rapidly.

• Remove the atomizer cap or atomizer tube from the vaporizer.
• Exposing the coil, drop a small amount of wax concentrate onto the QBC Coil.
• Replace the atomizer cap or tube securely.

• Ensure the Yocan iCan e-Rig Vaporizer is powered on.
• Press the power button three times to cycle through the preset temperature levels.
• Release the button when your desired temperature level is selected.
• Note: The vaporizer has two preset levels, low and high. An RGB light indicates the level - a solid green light for low and red for high.

• Remove the top part of the vaporizer.
• Carefully pour out the used water from the glass bubbler.
• Refill the bubbler with the desired amount of fresh water.
• Reattach the top part of the vaporizer securely.

• Detach the top part of the vaporizer.
• Ensure the coil is cool before proceeding.
• Untwist the coil from the 510-threaded link by turning it counterclockwise.
• Attach the new QBC Coil by twisting it onto the 510-threaded connector in a clockwise direction, avoiding over-tightening.
• Reattach the top part of the vaporizer securely.

• Ensure the vaporizer is turned off by pressing the power button five times rapidly.
• Remove the coil to clean contacts using a cotton swab.
• Use a dry paper towel to wipe the body and glass bubbler, ensuring they are dry before storing.
• Use the dedicated charging cable to avoid battery damage and charge the vaporizer before long-term storage.
• Note: Always store the parts dry to prevent mold buildup which may cause negative effects when used with molds.