Yocan Magneto Pen For Wax Concentrates Manual

The Yocan Magneto Dab Pen is an innovative vaping device designed for concentrates. It combines a traditional 510 thread design with modern functionality, providing an enhanced vaping experience. This manual will guide you through preparing, using, and maintaining your Yocan Magneto Dab Pen.

Before using your Yocan Magneto Vaporizer, ensure it is fully charged. Locate the Micro USB charging port, typically at the base of the device, and connect the charger to replenish the battery.

Once charged, you can turn on the Yocan Magneto Vaporizer. Locate the power button, which is a distinctive diamond-shaped button on the middle part of the battery, facing outwards just above the Magneto logo. To power the device on or off, press the power button 5 times quickly.

Before the first use, it's crucial to sterilize the coils to remove any manufacturing impurities. With the device powered on, press and hold the power button for 5 seconds, and repeat this process two or three times. Then, let the device rest for 2-3 minutes before use.

Step 1: Access the Wax Container

• Detach the built-in concentrate chamber at the bottom of the vaporizer.

Step 2: Expose the Coils

• Pull the mouthpiece upwards to reveal the Yocan Magneto Coils.
• Remove the coil cap by pulling it upwards.

Step 3: Load Concentrates

• Use the coil cap as a dab tool to pick up wax concentrates from the integrated wax container.
• Load the concentrate onto the coil, ensuring the dab tool does not touch the coils directly.

Step 4: Reassemble

• Return the coil cap, ensuring it is properly connected with the magnets.
• Slide the mouthpiece back into place, securing the magnetic connection.

With the vaporizer charged, sterilized, and loaded, you're ready to start vaping.

• Place your lips on the mouthpiece and prepare to draw.
• Press and hold the power button to initiate vapor production, then inhale from the mouthpiece while vapor is being produced.
• Repeat the process as desired until the concentrate is fully consumed.

Keeping your device clean is essential for optimal performance and longevity.

• With the device on, press the power button 5 times to turn off, and repeat to turn it on.
• Conduct a burn-off session by pressing and holding the power button for 5 seconds, 2-3 times.
• Allow the vaporizer to cool down.
• Dismantle the device by carefully pulling the magnetic connections apart and twisting off any threaded parts.
• Use a dry paper towel to remove any residue, then reassemble the device for future use.