Yocan Orbit Vaporizer Pen Manual

Explore the Yocan Orbit Vaporizer Pen – a true game-changer in portable vaping. Yocan continues its legacy of transforming the vaping scene with its innovative designs at an accessible price point. The Yocan Orbit stands out in the world of wax pens, introducing features typically reserved for dab pens and e-rigs into its sleek, pocket-sized form. With the inclusion of terp pearls and a coil-less quartz cup, the Yocan Orbit elevates the wax vaping experience, intensifying the flavors and effects of your chosen wax concentrates. Its revolutionary design guarantees a superior session, rivaling larger, less portable rigs. Discover the next level of wax vaping with the Yocan Orbit – a compact powerhouse ready to enhance your vaping journey.

1. Fully charge your Yocan Orbit Vaporizer Pen’s battery. Connect the USB charging cable to a computer or a wall adapter and the USB Type-C tip to the vaporizer. The charging port is located just above the Yocan logo on the device.

1. Once the battery is fully charged, you can start using the device by quickly pressing the power button five times. The power button is the hexagonal button located on the body of the battery just above the "ORBIT" logo and lights up once powered on.

1. Prepare your select wax concentrates before using the device.
2. Remove the glass mouthpiece and cover by gently pulling it away from the battery.
3. Load your wax concentrates onto the coil-less atomizer using the included pick tool.
4. Replace the glass mouthpiece and cover by gently pushing it towards the battery.
5. Ensure the device is powered on.
6. Select your preferred temperature level.

Note: The device uses O-rings to keep the glass mouthpiece and cover in place. If the O-rings are removed from their grooves during the removal and replacement process, try twisting the mouthpiece and cover to avoid dislodging the rubber.

1. Ensure the device is fully charged and loaded with your selected wax concentrates.
2. Choose your preferred voltage setting by pressing the power button three times.
3. Prepare to inhale from the mouthpiece once you've set your preferred settings.
4. Press and hold the power button to activate the heating element.
5. Repeat the process until you're satisfied or until the wax concentrates are fully consumed.

1. Ensure the device is fully charged.
2. Press the power button three times to cycle through the preset temperature settings.
3. Once you've found the desired temperature level, release the button, and it will automatically activate the selected profile.

Voltage Settings:

• Low – 3.4 volts (White LED)
• Medium – 3.7 volts (Blue LED)
• High – 4.0 volts (Green LED)

1. Press the power button twice to activate the pre-heat function.
2. To de-activate pre-heat, simply press the power button twice again.

Note: The pre-heat mode operates at a constant low temperature of 3.4 volts. It warms up the wax concentrates without extracting cannabinoids.

1. Wipe off any dirt or residue on the battery with a dry paper towel.
2. Disassemble the device and separate the removable parts.
3. Ensure you follow the charging instructions and use the dedicated charger to avoid damaging the battery.