Yocan Orbit Wax Pen Premium Vaporizer Pen For Wax Manual

Welcome to the user manual for the Yocan Wulf Orbit Dab Pen Concentrate Vaporizer. This guide will assist you in setting up, using, and maintaining your vaporizer for optimal performance and longevity.

To power on the Yocan Orbit Vaporizer Pen, follow these steps:

1. Fully charge your device using the USB Type-C cable provided. Connect it to a power source and the device’s charging port located just above the Yocan logo.
2. Press the power button quickly five times. The power button is a hexagonal button found on the body just above the "ORBIT" logo.
3. The button will light up, indicating the device is on.

Loading your pen with concentrates is straightforward:

1. Prepare your wax concentrates with the pick tool provided.
2. Remove the glass mouthpiece by pulling it away from the battery.
3. Load the concentrates onto the coil-less atomizer using the included pick tool.
4. Replace the glass mouthpiece securely by pushing it back towards the battery.
5. Ensure the device is powered on and ready for use.

Note: The device uses O-rings to keep the glass mouthpiece in place. If dislodged, gently twist the mouthpiece during removal or replacement.

Follow these steps to enjoy your vaping session:

1. Ensure the device is fully charged and loaded with concentrates.
2. Select your desired voltage by pressing the power button three times.
3. When ready to inhale, press and hold the power button to activate the heating element.
4. Begin inhaling from the mouthpiece as the quartz balls start spinning for even vaporization.

Adjust the temperature level to your preference with ease:

1. Press the power button three times quickly to cycle between voltage settings.
2. Release the button when your desired setting is indicated:
   • 3.4V – White
   • 3.7V – Blue
   • 4.0V – Green

Take advantage of the pre-heat function for a thorough vaping experience:

1. Press the power button twice to activate the pre-heat at a constant 3.4V.
2. To deactivate pre-heat, press the power button twice again.

Note: This mode warms up the wax without burning essential cannabinoids.

Regular maintenance will ensure the longevity of your vaporizer:

1. Wipe the battery exterior with a dry paper towel to remove any residue.
2. Disassemble the device and clean each removable part separately.
3. Follow the charging instructions using the provided cable to maintain battery health and prevent damage.

By following these instructions, you’ll ensure your Yocan Wulf Orbit Dab Pen Concentrate Vaporizer provides a pleasurable and consistent vaping experience.