Yocan Wulf Evolve Plus Xl Dab Pen Vaporizer Manual
Experience the premium vaping performance of the Wulf Evolve Plus XL Dab Pen Vaporizer by Yocan. This innovative device combines the exceptional capabilities of Wulf Mods with Yocan's leading vaping technology to offer superior usability and convenience.
Key Features and Specifications
- Magnetic connection for seamless atomizer tube and base assembly.
- Exclusive quad coil technology with four quartz rods for bigger clouds and purer vapor.
- Leak-proof coil cap to prevent spills.
- Adjustable airflow valve for customized sessions.
- 1400mAh battery with micro-USB charging compatibility.
- Dual compartment silicone jar for efficient concentrate storage.
Preparing the Wulf Evolve Plus XL Vaporizer
How to Charge the Device
- Connect the device to a power source using the included micro-USB cable.
- Avoid overcharging for best battery health. Be sure not to use power sources like powerbanks over 5V or when in a car.
How to Turn On the Vaporizer
- Press the oblong-shaped/elongated power button, located in the middle part of the battery, **5 times** to turn the device on.
- To sterilize, hold the power button for **5 seconds** two to three times to cleanse the coils.
- Allow the device to rest for 2-3 minutes post-sterilization before loading your concentrates.
Loading the Yocan Wulf Evolve Plus XL Vaporizer
- Detach the built-in concentrate chamber by pulling it from the bottom of the device.
- If the device is new, ensure it is sanitized before use following the preparation steps.
- Pull the mouthpiece upwards to expose the Yocan Quad Coils.
- Rotate the coil caps counter-clockwise to unveil the quad coils.
- With your dab tool, place the concentrate onto the coil without touching the rods directly.
- Replace the coil cap by twisting it clockwise, ensuring it is snug but not overtightened.
- Slide the mouthpiece back to its magnetic connection.
Vaping with the Yocan Wulf Evolve Plus XL Vaporizer
- Ensure the device is charged, sterilized, and loaded with concentrates.
- Press your lips onto the mouthpiece in preparation to **inhale**.
- **Press and hold** the power button. When vapor production is evident, begin to inhale.
- Continue until the concentrate is fully consumed, repeating as necessary.
Care and Maintenance of the Yocan Wulf Evolve Plus XL Vaporizer
- Turn the vaporizer on and off with **5 clicks** of the power button.
- Invert the vaporizer to perform a burn-off by **holding** the power button for **5 seconds**, repeating 2-3 times.
- Let the device cool.
- Dismantle the vaporizer by separating magnetic and threaded components.
- Use a dry paper towel to remove any liquid residue, then reassemble the vaporizer.
What’s Included in the Package
- Wulf Evolve Plus XL Vaporizer
- Atomizer
- Small Tool
- 1400mAh Battery
- Micro USB Cable
- Lanyard
WARNING: Always charge using the provided micro-USB cable. Do not use chargers with a voltage above 5V or charge in your car to avoid damaging the battery and internal components.
```