Yocan Wulf Flat Mini 510 Thread Cart Vape Pen Battery Manual

Welcome to the user manual for the Yocan Wulf Flat Mini 510 Thread Cart Vape Pen Battery. This guide will walk you through the steps to enhance your vaping experience with the Wulf Flat Mini Cartridge Vaporizer.

1. Locate the Type-C charging port on your vape pen battery.
2. Connect a USB-C charging cable (not included) to the port.
3. Plug the other end of the cable into a suitable power source.
4. Allow the battery to fully charge for optimal performance.

1. Identify the square-shaped power button located at the upper part of the battery.
2. Press the power button five times quickly to turn the vape pen on.
3. To turn off, press the power button five more times quickly.

Make sure the vape pen is powered on before changing the voltage setting.

1. Press the power button twice to toggle through the pre-set voltage settings.
2. Release the button when the desired voltage setting is indicated by the corresponding light:
• Low – 2.6V – White Light
• Medium – 3.2V – Green Light
• High – 3.8V – Red Light

1. With the vape pen on, press the power button twice quickly to activate the 10-second preheat function.
2. The pen will automatically preheat, ensuring your cartridges are ready for use. Pressing once will stop the preheat.

Wax

1. Check the vape pen's 510-threaded connections for obstructions and clear if necessary.
2. Twist the 510-threaded wax coil clockwise onto the battery until you feel resistance.
3. Use a dab tool to place wax concentrates on top of the coil, avoiding direct contact with the coils.
4. Attach any necessary accessories, such as the mouthpiece.

Oil Cartridge

1. If using a refillable cartridge, ensure it is filled before attaching it to the vape pen.
2. Twist the 510-threaded oil cartridge clockwise onto the battery until you feel resistance.
3. Attach any necessary accessories, such as the mouthpiece.

1. Ensure the battery is fully charged and the cartridge is properly connected.
2. Choose your preferred voltage setting.
3. Place lips on the mouthpiece.
4. Press and hold the power button while inhaling to activate heating and vapor production.
5. Release the button to stop heating. Repeat as necessary.

1. Ensure the vape pen is turned off by pressing the power button five times quickly.
2. If a wax coil is connected, turn the battery upside down and perform a burn-off (press and hold the button for two to three seconds, repeating if needed) to clear residue.
3. Allow the pen to cool.
4. Unscrew the coil or cartridge counter-clockwise to remove it.
5. Use a cotton swab or dry paper towel to clean the links and battery surface.
6. Reassemble the vape pen before storage or next use.

Thank you for choosing the Yocan Wulf Flat Mini. Enjoy a customized vaping experience with ease and safety.