Yocan Wulf Lx Slim Portable Dry Herb Vaporizer Manual

Discover a world of convenient, portable vaping with the Yocan Wulf LX Slim Portable Dry Herb Vaporizer. Engineered for an optimal vaping experience, the Wulf LX Slim is built with advanced technology to suit both casual and regular users. Explore all its features and operations below.

To power on your Wulf LX Slim, hold down the power button located on the side of the device for 3 seconds. This will activate the device and initiate the preheating process.

The Wulf LX Slim offers four different temperature settings to cater to your vaping preferences. To change the temperature, press the power button once. This will cycle through the preset temperatures and change the LED light accordingly:

• Yellow: 360°F
• Green: 390°F
• Blue: 410°F
• Red: 440°F

Understanding Temperature Indicators

The LED light on the device indicates your selected temperature. The device will vibrate once to signal the start of the preheating process. After reaching the desired temperature, it will vibrate twice to notify you that it's ready for use.

Start by removing the bottom cap to expose the dry herb chamber. Gently fill the chamber with ground dry herb, ensuring not to overfill to maintain optimal airflow.

After loading the dry herb and selecting your temperature, wait for the device to vibrate twice, indicating it’s ready. Each session lasts three minutes. At the highest temperature (Red - 440°F), the heating cycle lasts two minutes.

Use the provided Type-C Charging cable to charge your device. The initial charge should last two hours. For subsequent charges, do not exceed one hour to preserve battery lifespan.

Charging Indicators

If the battery is below 20%, the device will flash a red light 10 times and shut down. Ensure a full recharge to maintain device functionality.

If you encounter a short circuit warning, indicated by a red light flashing three times before shutting down, stop using the device until resolved.

Before cleaning, make sure the device is powered down. Use a cloth to clean the exterior. Remove the base and clean the chamber with a q-tip moistened with isopropyl alcohol. For the mouthpiece, disassemble the screen and clean with a q-tip and alcohol. Let all parts dry completely before reassembly.

By following these instructions, you’ll ensure your Wulf LX Slim Vaporizer remains in optimal condition, providing you with an excellent vaping experience. Enjoy your sessions with this sophisticated, portable device.