Yocan Ziva Smart 510 Thread Vape Cart Battery Manual

Welcome to the Yocan Ziva Smart Cart Battery Vaporizer manual. Experience efficient and discreet vaping with precise control over your settings. Follow these instructions to get the best experience from your device.

Using a USB Type-C Charging Cable

• Use a USB Type-C charging cable to charge the device.
• Connect the USB charging cable to a wall adapter and plug the adapter into a wall outlet.
• Attach the other end of the charging cable to the Yocan Ziva Smart Vaporizer Mod.

Note: You can also connect the charging cable to your computer or any compatible USB port for charging.

• Ensure the device is fully charged for optimal performance.
• Press the power button located at the bottom of the device five times quickly to power it on.
• Press the same power button five times quickly again to turn the device off.

• Remove the aluminum housing from the device.
• Attach your cartridge to the base part of the device.
• Replace the aluminum housing back onto the device.

• Ensure the device is powered on.
• Press the power button three times to cycle through the voltage options: 2.6 volts, 3.2 volts, and 3.8 volts.
• Release the button when you've selected the desired voltage level.

• Turn off the device by pressing the power button five times rapidly.
• Remove the aluminum body from the device.
• Wipe the contacts clean with a cotton swab.
• Use a dry paper towel to clean the exterior of the device.
• Charge the device using the recommended charging cable to prevent battery damage.
• Charge the device before storing it for extended periods.

Note: Cartridge and charging cable are not included.