Yocan Wulf Kodo X Ray Series 510 Thread Vape Cart Battery Manual

The Yocan Wulf Kodo X-Ray Series 510 Thread Vape Cart Battery is designed to provide an exceptional vaping experience with its robust features and stylish design. This manual will guide you through its usage and maintenance.

To power on the device, press the power button, located on the front of the device, five times in quick succession.

The Kodo X-Ray Series features three voltage settings: 2.5V, 3.0V, and 3.5V. To switch between these settings, simply press the power button three times. You'll be able to customize your vaping experience by adjusting the voltage according to your preference.

The device offers a 10-second preheat setting. To activate this, press the power button two times. This feature is useful for preparing your cartridges and ensuring a rich and flavorful vapor.

Screw your 510 threaded cartridge into the top connection of the Kodo X-Ray Series until it is snug. Avoid overtightening to prevent damage.

To turn off the Kodo X-Ray, press the power button five times quickly. This is the same sequence used to turn the device on.

Charge your Wulf Kodo X-Ray using a USB-C cable. Ensure your power source does not exceed 5V to protect the device's internal components. For initial charging, allow two hours for a full charge, and limit subsequent charges to one hour.

• Short Circuit Warning: The device flashes three times.
• No Cartridge Warning: The device flashes five times.
• Low Battery Warning: The device flashes ten times before shutting down.
• Auto Shutoff: Engages after 15 seconds of continuous use, indicated by ten flashes.

For best performance, regularly clean the device using a disinfectant wipe. Ensure the cartridge connection remains free from residue by using a q-tip dipped in isopropyl alcohol. Regular maintenance will extend the lifespan of your device.